Skip to content
Learn

SBA 7(a) vs SBA 504 loan: which fits your business

6 min read

The quick answer

As of 9 November 2026, the use of funds decides it. SBA 504 proceeds may only buy fixed assets with at least ten years of useful life at a fixed location, so working capital and inventory are out. SBA 7(a) covers those plus real estate, equipment, refinancing and a change of ownership. Buying the building or the long-life machine points to 504.

The test that decides it

Our own SBA page gives the short version: "A simple test: if you are buying the building or heavy equipment, look at 504; for almost everything else, start with 7(a)." The regulation is why. Under 13 CFR 120.120(a)(6), "What are eligible uses of proceeds?", a borrower may use proceeds from any SBA loan to acquire and install fixed assets, but "for a 504 loan, these assets must have a useful life of at least 10 years and be at a fixed location." Paragraph (b) then adds inventory, supplies, raw materials and working capital, for 7(a) and microloan proceeds only.

That split routes most applications before anyone discusses terms. Everything below comes from the current rulebook: SOP 50 10 8.1, effective 1 October 2026, and 13 CFR part 120.

Side by side, as written

What you are comparingWhat the rule saysSource
Uses both programs shareA borrower may use proceeds from any SBA loan to acquire land, purchase, convert, expand or renovate existing buildings, construct new ones, and acquire and install fixed assets13 CFR 120.120(a)
Working capital and inventory"A Borrower may also use 7(a) and microloan proceeds for: (1) Inventory; (2) Supplies; (3) Raw materials; and (4) Working capital"13 CFR 120.120(b)
What 504 proceeds cannot pay for"Ancillary business expenses, such as: (1) Working capital", plus franchise fees and advertising, and "Automobiles, trucks, and airplanes"13 CFR 120.884(d), (e)
Maximum size, 7(a)"The maximum loan amount for any one Standard 7(a) loan is $5,000,000"SOP 50 10 8.1, Section B, Ch. 1, "Maximum Loan Amount"
Maximum size, 504The gross debenture is "limited to an outstanding maximum balance of $5,000,000 in the aggregate for each small business concern, including its affiliates"; $5,500,000 applies per project only to Small Manufacturers and Eligible Energy Public Policy ProjectsSOP 50 10 8.1, Section C, Ch. 1, Para. D.1, "Debenture Limits (Minimum and Maximum)"
Maturity, 7(a)Working capital, inventory and intangible assets "must not exceed 10 years"; equipment generally 10 years, "up to 15 years if the IRS asset class useful life supports the term"; real estate "must not exceed 25 years"SOP 50 10 8.1, Appendix 17, Para. A, "General Requirements"
Maturity, 504"Maturity of the 504 loan is 10, 20, or 25 years based upon the remaining useful life of the property being financed": a maximum of 25 years for real estate, a minimum of 10 for machinery and equipmentSOP 50 10 8.1, Section C, Ch. 1, Para. D.2, "Loan Maturities"
Who sits at the table on a 504"A contribution by the small business in an amount of at least 10 percent of the Project costs", a loan from the CDC debenture "for up to 40 percent of the Project costs and certain administrative costs", and "A Third Party Loan comprising the balance of the financing, collateralized by a first lien on the Project property"13 CFR 120.801(c)
What you put in on a 504"At least 15 percent" if the business "has operated for two years or less" or the project is "a limited or single purpose building or structure", "At least 20 percent" if both, "At least 10 percent, in all other circumstances"13 CFR 120.910(a)
The condition only 504 carries"A Project must create or retain one job opportunity per $95,000 guaranteed by SBA", or per $150,000 for a Small Manufacturer or a project meeting an Energy Public Policy GoalSOP 50 10 8.1, Section C, Ch. 1, Para. A.1, "Job Creation or Retention (Dollars per Job)"
Occupancy, on both programs"For an existing building, the Applicant must occupy 51% of the Rentable Property and may lease to a third party up to 49%"; for new construction the figure is 60%SOP 50 10 8.1, Section A, Ch. 3, Para. C, "Occupancy and Leasing Requirements"
Refinancing an advance or a factoring line"Factoring agreements are not eligible for refinancing." A sales-based repayment agreement qualifies only "if the original agreement has been converted to a term loan, has amortized for at least 24 months, and no additional Agreements have been implemented since the conversion of the prior agreement(s)"SOP 50 10 8.1, Appendix 14, 7(a) Debt Refinancing Requirements, Para. A, "General Requirements"

The 504 condition most comparisons skip

504 is not a real estate flavor of 7(a). Under "Purpose of the 504 Loan Program," the SOP opens Section C by calling it "an economic development program to create and preserve job opportunities and stimulate growth, expansion, and modernization of small businesses."

The effect is in the next paragraph. Under "Job Creation or Retention (Dollars per Job)," a project "must create or retain one job opportunity per $95,000 guaranteed by SBA." A project that will not create jobs on that arithmetic has to qualify another way, through one of the eighteen goals listed at 13 CFR 120.862, "Other economic development objectives": assisting manufacturing firms, aiding rural development, expanding exports, "Reduction of energy consumption by at least 10 percent" and the rest. A 7(a) file is never asked this question, which is one reason a plain building purchase sometimes still routes to 7(a).

Two things worth correcting before you plan around them

First, the cap. SBA's 504 page leads with "up to $5 million" and says in its body that the maximum is $5.5 million. 13 CFR 120.931, "504 Lending limits," reconciles them: the general ceiling is a $5,000,000 outstanding balance for each borrower and its affiliates, and $5,500,000 is per project, reserved for Small Manufacturers in NAICS sectors 31 to 33 and for energy projects.

Second, "owner-occupied" is shorthand, not a 504 rule. The occupancy floor sits in Section A of the SOP, which governs both programs, and in 13 CFR 120.131: buy an existing building with a 7(a) loan and you still occupy 51 percent of the rentable property.

If you are carrying an advance or a factoring line

Sequence this first. Appendix 14 of the SOP, 7(a) Debt Refinancing Requirements, Para. A, is blunt: "Factoring agreements are not eligible for refinancing," and "If the Sales-Based Repayment Agreement is still active, it is not eligible for refinancing." Sales-based repayment agreement is SBA's term for a merchant cash advance. The one narrow path is an agreement already converted to a term loan that has amortized for at least 24 months with nothing new taken since. So the planning point on our SBA page holds: active advances usually have to be cleared another way first. Our guides on working capital versus revenue-based financing and equipment, lease or loan cover the alternatives.

Capital Selector reads your business against both programs: amount, use of funds, time in business, cash flow, and whether a building or a ten-year asset is in the plan. The calculators show what a longer maturity does to a payment, and the readiness check runs with "No sign-up, no credit pull." Capital Selector is a financing marketplace, not a lender. Being matched is not an approval. As the disclosures say, "Approval, amounts, rates, and terms are determined solely by the lender after its own review." This guide is general information, not financial, tax or legal advice.

Questions

Can a 504 loan refinance an existing 7(a) loan, or the reverse? Both directions exist, on different conditions. 13 CFR 120.884(a), "Ineligible costs for 504 loans," rules out debt refinancing "(other than interim financing), except as provided in § 120.882(e) and (g)", and those two exceptions are the door. Under 13 CFR 120.882(g)(3)(ii) an existing 7(a) loan "may be refinanced if the CDC notifies the 7(a) lender in advance in writing (by email or letter)"; under 13 CFR 120.882(e)(3), where the project involves an expansion, "Existing 7(a) and 504 loans may be refinanced under this section in accordance with SBA policies or procedures". Going the other way, under Appendix 14, Para. A, "Refinancing a SBA 504 with a 7(a) loan" is allowed on the Appendix's conditions if both the Third Party Loan and the 504 loan are being refinanced, or if the Third Party Loan has been paid in full and the 504 loan is being refinanced as part of a larger transaction funding an expansion of or renovations to the Project Property.

Which one takes longer? Neither program page publishes an end-to-end funding time. SBA's published 7(a) review windows measure its review of the lender's package, not your whole calendar; our guide on how long it takes to get a business loan works through what they cover. On 504, under "How do I apply?", SBA says the loans "are available exclusively through Certified Development Companies (CDCs)", so a CDC joins the file alongside the senior lender.

Does 504 refinancing follow the same rules as 7(a) refinancing? No. Under 13 CFR 120.882(g), "Eligible Project costs for 504 loans," a 504 Refinancing Project that does not involve an expansion may refinance only "qualified debt": a commercial loan incurred at least six months before the application, 75 percent or more of which went to an eligible fixed asset, and collateralized by eligible fixed assets. The same paragraph requires two full years of operating history as of the application date.

What if the amount I need is well under $350,000? Read the smaller programs too. Under "What is a microloan?", SBA Microloans run "up to $50,000" and average "about $13,000"; the maximum term is seven years under "Repayment terms"; and under "How do I use a microloan?" the proceeds "cannot be used to pay existing debts or to purchase real estate".

All guides

See what your business qualifies for.

A short conversation is all it takes to get matched across a 75+ lender network.

Get matched